TestMyGears

Maus-Test online

Kostenloser Online-Maus-Test: Doppelklick-Test, Polling-Rate (Hz), CPS, Tasten, Scrollrad und Cursor-Tracking im Browser. Kein Download.

Letztes Ereignis

—

Taste

—

Zeitmessung

—

Tasten-Test

Drücken Sie jede Maustaste — links, rechts, Mitte, Zurück und Vor — und sehen Sie sie unten aufleuchten.

Full scroll test
Links 0
Mitte 0
Rechts 0
Zurück 0
Vor 0
Richtung —
Ø / Tick 0
Raster 0

Polling-Rate

Hz Polling-Rate

Full test Peak: —
— 0

Doppelklick-Test

Doppelklick-Schalter

Zweimal schnell klicken
—
Count 0
Interval —

Intervallprotokoll

Noch keine Klicks — klicken Sie zweimal schnell auf das Pad.

Klickgeschwindigkeit (CPS)

Klickgeschwindigkeit

Full test
Testdauer
Hier so schnell wie möglich klicken

Glätte

Cursor-Glätte

Full test
Maus hier langsam bewegen

Click latency test Per-click delay log with min, max, and average — full instrument page

Open test

Four tests on one page — buttons, polling, double-click & CPS

Each card shows what to run in the tool above and what the readout tells you about your hardware — plus pointer tracking on the same page.

Buttons & scroll wheel

Click left, right, middle, back, and forward on the diagram — each region lights up with a live count. Scroll over the pad for direction, delta, and ticks; open the full scroll test for a per-tick log and delta graph.

Was gemessen wird

Each switch should send one press; the wheel should report steady direction and tick size. Dead buttons, sticky middle clicks, or skippy scroll show up immediately — the dedicated scroll test adds up/down counters and ticks per second.

Double click test online

Log every press interval on the double click test pad. Sub-80 ms chatter, deliberate double-clicks, and normal gaps are labeled so worn switches are obvious before you RMA.

Was gemessen wird

Gaps under ~80 ms usually mean switch bounce (the mouse double-clicks by itself). Deliberate double-clicks land around 100–250 ms; Windows accepts up to ~500 ms.

Mouse polling test (Hz)

Start the polling pad and read live Hz plus a 48-bar history. Confirm 125, 500, or 1000 Hz after changing USB port, dongle, or mouse software settings.

Was gemessen wird

Polling is how often the mouse reports position to the PC. A browser test estimates Hz from pointer timing; peak should match your OS and vendor setting when the link is healthy.

CPS click speed test

Timed 1s, 5s, and 10s clicks-per-second runs with live score, total clicks, and a saved personal best — standard for Minecraft PvP and switch comparisons.

Was gemessen wird

CPS measures click speed in a timed window. A 5-second run filters lucky 1-second bursts — not to be confused with unrelated “CPS” acronyms elsewhere on the web.

How to test buttons, wheel, polling & double-click

Work top to bottom on this page: buttons and scroll wheel first, then polling and CPS, then double-click and tracking. Most faults show up in under three minutes.

  1. Test buttons & scroll wheel

    Click left, right, middle, back, and forward one at a time, then scroll up and down. Each button should highlight; ticks should rise smoothly both ways. Open the full scroll test for delta logs if the wheel feels uneven. See also: full scroll test .

    Tip Test side buttons twice — intermittent faults hide on a single press

  2. Run the mouse polling test

    Click Start on the polling pad and move the mouse steadily. Note peak Hz — 1000 Hz gaming mice should read near 1000 when wired and focused. Then pick a CPS duration (5s is standard) and click the arena as fast as you can. See also: polling test pad .

    Tip Use a direct USB port or nearby dongle for the steadiest Hz readout

  3. Double click test & tracking

    Double-click the test pad several times and read the interval log for chatter. Finish with slow circles and fast flicks on the tracking canvas — gaps in the trail can mean smoothing or wireless dropouts. See also: double click test pad .

    Tip Screenshot the double click test log before a return or RMA

Mouse test checklist

Buttons & scroll wheel

Every primary click bumps its counter once per press. Scroll ticks rise evenly both directions — missing middle clicks often mean a worn wheel switch.

Double click test

No sub-80 ms chatter when you intended a single click. Deliberate double-clicks should log consistently between ~100–500 ms.

Mouse polling rate

Peak Hz should match your software setting (e.g. 1000 Hz). Large gaps in the bar graph can mean USB power saving or a weak wireless link.

CPS & tracking

CPS scores feel stable across repeated 5s runs. Tracking trails stay continuous during slow movement without long gaps.

When to run each mouse test

Dead or sticky buttons / wheel

  • Press every button on the diagram once.
  • Scroll up and down — watch direction, delta, and ticks.
  • Reset counts and re-test any switch that felt soft.

Mouse double-clicks by itself

  • Run the double click test pad on the faulty button.
  • Look for random sub-80 ms intervals in the log.
  • Screenshot results before buying a replacement or RMA.

Verify 1000 Hz polling

  • Set 1000 Hz in mouse software, then run the polling test.
  • Compare peak Hz on USB vs wireless.
  • Re-test after moving the dongle closer.

CPS / gaming click speed

  • Use the 5s CPS test as your standard benchmark.
  • Compare wired vs wireless on the same technique.
  • Track personal best across practice sessions.

Mouse troubleshooting guide

Mouse issues? Self-diagnose with the pads on this page — match your symptoms to the fix list below.

Double-click issue

Symptoms A single click opens files twice, or items release while dragging — classic switch bounce.

Solution

  1. Run the double click test pad and screenshot sub-80 ms chatter.
  2. Blow compressed air around the switch; avoid liquid unless you know the assembly.
  3. Raise double-click speed in Windows or macOS mouse settings as a temporary mask.
  4. Replace the switch or mouse if bounce persists in the interval log.

Open double click test pad

Cursor drift / jitter

Symptoms The cursor moves on its own or jitters when the mouse is still on the desk.

Solution

  1. Trace slow circles on the pointer tracking pad — gaps mean smoothing or dropouts.
  2. Clean the sensor lens and try a cloth mouse pad (avoid glass for testing).
  3. Disable pointer acceleration in OS settings while you test.
  4. Swap USB port or dongle if drift only happens wirelessly.

Open tracking pad

High latency

Symptoms The mouse feels laggy in games or the cursor trails behind fast flicks.

Solution

  1. Run the mouse polling test — peak Hz should match your software setting.
  2. Plug into a direct motherboard USB port (avoid unpowered hubs).
  3. Update mouse firmware and GPU drivers; disable USB selective suspend.
  4. Charge or replace batteries; turn off aggressive power saving on wireless.

Open polling test pad

Unstable connection

Symptoms Clicks or movement drop out intermittently — common on 2.4 GHz wireless.

Solution

  1. Move the receiver closer (USB extension or front-panel port).
  2. Keep routers, phones, and Bluetooth headsets farther from the dongle.
  3. Charge the battery and re-pair in vendor software.
  4. Compare wired vs wireless on the button diagram to confirm the link.

Open buttons & wheel pad

Scroll wheel skips or one-way scroll

Symptoms Pages jump unevenly, the wheel only scrolls one direction, or some notches register nothing.

Solution

  1. Run the mouse scroll test — compare up vs down tick counts and read the delta log for missing rows.
  2. Blow compressed air around the wheel encoder; avoid oil or water unless you know the assembly.
  3. Disable browser extensions that remap scroll; retest on a plain tab.
  4. If delta spikes wildly or one direction stays at zero, plan for encoder repair or replacement.

Open full scroll test

Polling rate guide

How report rate (Hz) relates to feel in games and everyday use — then confirm your setting with the polling pad above.

125 Hz

8 ms

Casual and turn-based games, office work.

Pros
Lower CPU use and better battery on wireless.
Cons
Cursor can feel steppy at high tracking speed.
Best for
Office mice and laptops on battery.

500 Hz

2 ms

Most MOBA, RPG, and general gaming.

Pros
Noticeably lower latency than 125 Hz.
Cons
Still below what high-refresh FPS players expect.
Best for
Mid-tier and heavy gamers on a budget.

1000 Hz

1 ms

FPS, competitive shooters, and fast flick aim.

Pros
Very low report latency; industry standard for esports.
Cons
Slightly higher CPU use; wireless may step down when idle.
Best for
Competitive gaming and most gaming mice.

4000–8000 Hz

0.125–0.25 ms

Flagship esports mice (Razer, Logitech, Pulsar, etc.).

Pros
Microsecond-class report intervals on paper.
Cons
Needs a strong CPU and high-refresh monitor to feel the gain.
Best for
Top-tier players chasing every edge — verify with the polling test.

Mouse buying guide

Key specs to weigh when you shop — then validate buttons, wheel, and polling on this page before the return window closes.

Gaming mouse

  • High-precision sensor (16K+ DPI class)
  • High polling rate (1000 Hz+)
  • Adjustable weight or balanced shell
  • Programmable side buttons
  • Low lift-off distance (LOD)

Design & creative mouse

  • Fine DPI steps for pixel work
  • Precise scroll wheel with tactile steps
  • Comfortable shape for long sessions
  • Ergonomic thumb rest
  • Extra buttons for gestures or shortcuts

Office mouse

  • Quiet click switches
  • Long battery life (wireless)
  • Multi-device pairing (Bluetooth + dongle)
  • Ergonomic shell for all-day use
  • Reliable wireless link

What to prioritize — and what to test

Use the buying guide above to shortlist specs, then run the checks listed for your use case on this page.

  • Gaming

    Prioritize Accurate sensor, 1000 Hz+ polling, and a weight that suits your grip.

    Test here Polling pad, CPS arena, and double-click log.

  • Office

    Prioritize Comfortable shape, long battery life, and easy multi-device switching.

    Test here Button diagram and scroll wheel (direction, delta, ticks).

  • Design & creative

    Prioritize Fine DPI steps, a precise scroll wheel, and extra buttons for shortcuts.

    Test here Tracking pad for smooth paths, plus the button diagram.

  • Travel / portable

    Prioritize Small footprint, light weight, and a wireless link that survives movement.

    Test here Every button on the diagram after unpacking or a trip.

FAQ zu Maus-Test online

Was ist ein Click Test?

Ein Click Test prüft, ob Maustasten zuverlässig registrieren und wie schnell du klicken kannst. Auf dieser Seite: CPS-Arena für timed Click Speed (1s, 5s, 10s), Doppelklick-Test-Pad für Switch Chatter und das Button-Diagramm für Links, Rechts, Mitte, Zurück und Vor. Für Scrollrad-Clicks unseren Scroll-Test öffnen oder hier Middle Click press-testen.

Wie führe ich einen Mouse Speed Test durch?

Mouse Speed Test meint meist Polling Rate — wie oft die Maus Position in Hz meldet. Zum Polling-Pad auf dieser Seite scrollen, Start klicken und stetig bewegen, um Peak Hz (125, 500 oder 1000) zu lesen. Für einen dedizierten Mouse-Speed- und Polling-Test mit vollem Graph unsere Mouse-Polling-Test-Seite öffnen.

Wie teste ich Mouse Polling Rate online?

Diese Seite öffnen, zum Polling-Pad scrollen, Start klicken und die Maus stetig im Pad bewegen. Hz-Readout und Bar Graph schätzen Report Rate aus Pointer-Event-Timing — erwarte grob 125, 500 oder 1000 Hz, wenn OS und Maus-Software matchen. Tab fokussiert lassen für das steadieste Mouse-Polling-Test-Ergebnis.

Wie teste ich die Polling Rate einer Maus?

Zuerst Ziel-Hz in Maus-Software oder Windows setzen, dann den Browser-Polling-Test hier laufen lassen. Peak Hz sollte zu diesem Setting passen. Das ist eine Schätzung aus Move-Event-Gaps, kein USB-Analyzer — zeigt aber zuverlässig, ob der Browser 125 vs. 500 vs. 1000 Hz Reports bekommt.

Wie teste ich Maus-Doppelklick-Probleme?

Das Doppelklick-Test-Pad zweimal schnell klicken, dann Links und Rechts wiederholen. Das Intervall-Log markiert Chatter unter ~80 ms (klassisches Switch Bounce), Doppelklick unter ~500 ms und Normal für langsamere Gaps. Random Sub-80-ms-Einträge, wenn du einen Klick meintest, bestätigen einen abgenutzten Micro-Switch.

Wie führe ich einen Doppelklick-Test an meiner Maus durch?

Den Doppelklick-Test-Abschnitt auf dieser Seite nutzen — kein Download. Pad klicken wie zum Öffnen einer Datei. Jeder Druck loggt seinen Gap zum vorherigen, damit du bewusste Doppelklicks (~100–250 ms) gegen versehentliches Bounce vergleichen kannst.

Was ist ein Maus-Doppelklick-Test online?

Ein Browser-Tool, das Millisekunden zwischen Mausklicks aufzeichnet, damit du Switch Chatter spotten, Doppelklick-Speed testen und eine Maus diagnostizieren kannst, die von selbst doppelklickt. Diese Seite enthält den Test neben Polling, CPS, Buttons und Tracking.

Wie teste ich Clicks per Second (CPS)?

In der CPS-Arena 1, 5 oder 10 Sekunden wählen, Pad so schnell wie möglich klicken bis der Timer endet, und den Clicks-per-Second-Score lesen. Timing nutzt High-Resolution performance.now()-Timestamps. Die meisten Leute erzielen 5–7 CPS; 8–10 ist schnell. Dein Personal Best speichert sich auf diesem Device.

Welche Maustasten testet das?

Links, Rechts, Mitte (Wheel Click), Zurück und Vor via Pointer Events. Extra programmierbare Buttons hinter Zurück/Vor erreichen die Seite meist nie — die in Vendor-Software prüfen.

Wie teste ich das Scrollrad?

Über dem Button-Diagramm-Bereich auf dieser Seite scrollen — Richtung, Delta und Tick Count updaten live. Für einen vollen Scroll-Test mit Per-Tick-Log, Delta-Graph, Up/Down-Counters und Ticks pro Sekunde unsere dedizierte Mouse-Scroll-Test-Seite öffnen.

Wie teste ich das Maus-Scrollrad online?

Den Scrollrad-Abschnitt auf diesem Mouse Test Center für schnelle Richtungs- und Delta-Checks nutzen, oder den Mouse Scroll Test für detailliertes Event-Log, animiertes Rad-Diagramm und Delta-History-Graph öffnen — beide laufen im Browser ohne Install.

Warum registriert meine Seitentaste nicht?

Nur Zurück- und Vor-Seitentasten erreichen typischerweise den Browser. Andere Side Keys brauchen die Software des Mausherstellers. Auch OS-Remapping prüfen und dass die Seite Fokus hat.

Muss ich etwas installieren?

Nein. Der volle Maus-Test — Doppelklick, Polling Rate, CPS, Buttons, Rad und Tracking — läuft in deinem Browser mit Pointer Events.

Tips for buttons, wheel & polling tests

  • Windows focus & remapping

    Keep this tab focused. Check Settings → Bluetooth & devices → Mouse for button swaps or disabled navigation buttons before blaming the hardware.

  • macOS mouse settings

    System Settings → Mouse. Confirm secondary click and scroll direction match what you expect while testing.

  • USB / wireless path

    Prefer a direct motherboard USB port or a nearby wireless dongle. Bad hubs and low battery can drop clicks or scroll events.

  • Verify what you saw

    Reset counts, re-press the suspect button, and compare left vs right. If only browser Back/Forward fail, check OS shortcuts before RMA.

Verwandte Input-Tools

Tasten, Touch und Display weiter prüfen